APOSUN-UV-intensity-sensor-for-waterair-treatment-SW4 G3/4

SW4 G3/4

Waterproof UVC sensor

► Model: SW4 ► Range: 0~20000uW/cm2 ► Resolution: 10uW/cm2 ► Working voltage: 5VDC ► Current output: (4-20mA, 0-5V) ► Cable length: 2.5 meters ► Waterproof: 10 kg ► Weight: 500g ► Thread : G3/4 ► Please refer to the brochure for details * Measuring range can be customized.



SW4 G3/4 Waterproof UVC sensor

  • Measure ultraviolet (UV) light relative/absolute UV intensity
  • The low-cost, high-accuracy sensor that is ideal for air purifiers and UV sterilizers
  • Analog output (4-20mA, 0-5V)
  • An easy-to-use, superior long-time stability and corrosion resistance.
  • For low-pressure UV lights

Main Features

  • The “SW4 G3/4 Waterproof UVC sensor” is a UV sensor with a G3/4″ thread for operation in water. It is 10 bar water pressure resistant and is typically used for monitoring low-pressure UV lights in pressurized water. It will be configured on individual requirements which are clarified within the order process. Configurable parameters are the signal output type, the measurement range, and the spectral responsivity. The signal output is configurable as a 0…5V voltage output or 4…20mA current loop or photodiode output

General Specification

Parameter Value
Response Spectrum 210~280nm(UVC)
Peak Response Spectrum 253.7num
Output Signal (4-20mA, 0-5V)
Power Supply  (5vDC ,12v DC ,24v DC)
Load impedance >1k
Mode of Connection 3 wire
Measuring Range 0~20000uw/cm²
Power Consumption <0.5w
Operating Temperature -10~60 ℃
Storage Temperature -10~70 ℃
Shell Material SUS316L
Screw Specification G3/4
Cable Model  2.5M long

Other details

Connect Type: Wiring or other Connectors aviation plug available

Environmental Conditions: -10~70℃ (no ice or condensation)

Net Weight: 500g

Gross Weight: 520g ~630g

Warranty: 12 months

For support, please visit support center or email us at sale@aposunmeter.com

1 × SW4 G3/4 UV sensor

Package type: plastic bag with box